ADT® Authorized Dealer Serving York & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your York Residence

Residents must defend against various risks like fire, flooding, and burglary. But what about something that can’t be detected by human senses? Carbon monoxide creates unique challenges as you may never be aware that it’s there. Nevertheless, using CO detectors can easily protect yourself and your household. Learn more about this hazardous gas and where to place carbon monoxide detectors in your York residence.

What Is Carbon Monoxide?

Called the silent killer due to its lack of odor, taste, or color, carbon monoxide is a common gas caused by the incomplete combustion of fuels. Any appliance that utilizes fuels like an oven or fireplace may generate carbon monoxide. Although you normally won’t have any trouble, issues can present when equipment is not regularly serviced or appropriately vented. These oversights can result in an accumulation of this potentially deadly gas in your home. Heating appliances and generators are commonly responsible for CO poisoning.

When subjected to low amounts of CO, you may experience headaches, dizziness, fatigue nausea, or vomiting. Continuous exposure to elevated amounts can result in cardiorespiratory failure, coma, and death.

Recommendations On Where To Place York Carbon Monoxide Detectors

If your home is without a carbon monoxide detector, get one today. If possible, you ought to have one on each floor, and that includes basements. Browse these tips on where to place carbon monoxide detectors in York:

  • Place them on every floor, especially in areas where you have fuel-burning appliances, including water heaters, furnaces, gas dryers, and fireplaces.
  • Always use one within 10 feet of bedroom areas. If you only have one carbon monoxide detector, this is where to put it.
  • install them at least 10 to 20 feet away from potential CO sources.
  • Do not affix them right next to or above fuel-utilizing appliances, as a non-threatening amount of carbon monoxide may be released when they start and set off a false alarm.
  • Secure them to walls approximately five feet from the ground so they can sample air where occupants are breathing it.
  • Avoid putting them in dead-air places and beside doors or windows.
  • Place one in areas above attached garages.

Test your CO detectors routinely and maintain them per manufacturer guidelines. You will usually have to switch them out every five to six years. You should also make sure any fuel-burning appliances are in in good working order and adequately vented.